How to connect HP Deskjet printer to Wi-Fi?
The HP Deskjet is one of the better brands and type of
printers available in the market today. HP is also a brand which is highly
sought after by a number of people. One of the best things about the printer is
the fact that one can operate it with the help of Wi-Fi and internet. This
means that an additional effort of making sure you use wires etc. to connect
gets significantly reduced as well. It also enables the printer to print from a
large number of devices. The process of connecting becomes much easier due to
this.
It also ensures that you have an array of options for
printing, along with devices like phones, tablets etc. as well. The various
methods by which you can do this have been laid out in this article. Make sure
you follow whichever one you deem relevant.
Prior to connecting your HP
Deskjet printer to Wi-fi also make
sure that your device has been setup properly. The internet connection should
be in a working condition as well. Make sure that you have all of these details
cross checked with the help of other devices too. This will ensure that the
device is in a working condition for a longer period of time too.
The WPS method to connect HP Deskjet to Wi-Fi
This is a rather simple process and can complete the entire
setup within a matter of minutes with the push of a button. You have to first
click on the wireless menu and then press the WPS button. Give it some time
until the light on it starts to blink. Then you have to press the WPS button
again within the period of a few minutes which you get there. There might be
some cases where a WPS pin might need to be put in there. However, in some
others it might not. It differs according to the case scenario at hand.
Wireless auto connect option for your HP printer
This is an option which does not require ancillary wires
etc. and can be used with the help of only one software download option. Make
sure that you have gone to the printer website and typed in the name of the HP
printer. After this you will be given the link with which you have to download
the driver software. Make sure that you give some time to the download and
install option here. This is also something which will help you at a later
stage, so wait for the install process to complete properly.
Ensure you have your device ready to use after this is done.
The printer model here is relevant because we only want the drivers of the HP
desk jet to be downloaded from there. Otherwise the concerns arising out of
this would cause problems at a later stage and prevent the printing process
too.
Once you have downloaded the printer driver, then make sure
that you only then start using your printer device. The connection to WiFi will
not be enabled unless your printer and your device are both in a good working
condition for this purpose. Also ensure that both the devices are functioning
well individually.
Once the network connection is established, then you should
be able to conduct a few test print runs before you start to use it. Also make
sure that should any major changes have been made to your device, then you should
reboot it completely before using it again. This will also facilitate better
use of the entire setup and prevent further printer problems.
Comments
Post a Comment